How to Replace Your Tile Roofing in Minneapolis

When it comes to materials for roofing in Minneapolis, tile is one of the most popular. While the material itself is quite expensive and installation follows that same trend, the price is well worth the investment as tile roofs last many years longer than any asphalt or wood roof. In addition, they are fire-resistant, wind-resistant, and have few cases of mold or leaking.

Another detail which makes tile such an attractive choice for shingles is the fact that it is easily replaceable. When one breaks due to hail or some other debris, it can be replaced with almost no problems whatsoever. However, just like any roofing job, it follows a specific checklist for effective replacement. So here is our step-by-step guide to replacing tile shingles.

Step #1: Look for the Broken Tile

Of course, the first thing you need to do is inspect the roof. You need to look for signs of wear, leaking, and biological growth like fungi on the underside. Fortunately, finding these signs on tile shingles is quite simple for roofing in Minneapolis in that damaged tiles typically leave gaping holes, making them easy to find and replace.

Step #2: Stay Safe

When you are preparing to head up, be sure you follow every safety precaution possible. Do not wear loose clothing. Be sure to establish a safe zone for foot traffic, as falling tiles can result in some serious injury. We also recommend you wear rubber-soled shoes to help you from falling. It is also important that you avoid walking on the tiles themselves as they cannot bear the weight of a full human being.

Step #3: Replacing the Tile

When you find the broken shingle, all you have to do is break into smaller pieces using a light hammer. This will help you create a perfectly even hole for the replacement shingle to be put into place. Tile roofs are intricately connected to each other across a system of ridges and lips. So all you have to do is slide the new shingle into place.

Securing the shingle is a different matter, however, and this is why you should largely call a contractor specializing in roofing in Minneapolis. However, if you are intent on fixing it yourself, then listen closely. You have to drill a hole below the slot of the covering tiles. It is important that you do not drill into the pre-existing ones as the structural integrity of that section of roof will be compromised.

Once you have drilled the hole, hold the replacement tile in place with copper wire nail and the largest flathead screwdriver you can find. Then drive the nail between the covering tiles. Make sure the nail you use is twice the thickness plus one inch of the tiles—any smaller and the shingle will not be secure against the rafter. Once you cover the nail head to prevent rusting, you have successfully completed replacing your tile shingle!

Count on Coty

Like we mentioned, however, roofing in Minneapolis is tedious work which requires a steady hand as well as steady feet. So don’t do the work yourself and risk messing it up. Simply contact us and we’ll get it replaced for you!

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply